products Archive - Reta

Nails

midori — Wed, 09 Mar 2022 22:37:34 +0000

Our construction and beam nails comply with the European standard-EN 14592: 2008 + A1: 2012 and bear the CE mark.

CONSTRUCTION NAILS
They are applied in construction for joining various wooden elements (battens, boards, plating…). Manufactured according to the standard EN 14592:2008+A1:2012.

CONSTRUCTION NAILS Zn – GALVANIZED
Since they are exposed to various weather conditions, nails are galvanized to ensure a longer service life. They are used for fastening roof tiles and raceways. Manufactured according to the standard EN 14592+A1 Annex A.

NAILS FOR BEAMS
They are used for joining thicker wooden elements when constructing roofing. Manufactured according to the standard EN 14592:2008+A1:2012.

BATTEN NAILS
Batten nails have a wide range of application in construction. They are used for joining thinner wooden elements (beads, battens, wooden crates).

LOST HEAD NAILS
They are used for fastening wood panelling and solid strip fl ooring.

FELT NAILS
Used for fastening leather, canvas, artifi cial material in furniture upholstery.

CONCRETE NAILS
They are used for joining various materials and elements onto/into concrete surfaces.

STAPLES
They are used for fastening wires and various wire netting onto wooden posts.

CLOUT NAILS
They are used for fastening roofi ng paper, various foil and nylon.

CLOUT NAILS Zn – GALVANIZED
Since they are exposed to various weather conditions, nails are galvanized to ensure a longer service life. They are used for fastening roofi ng paper and vapour-permeable foil.

SCREW NAILS
They are used in construction for superior joining of wooden elements and manual crafting of transport packaging.

BOAT NAILS HOT-DIP ZN
Due to their high corrosion resistance they are used in the construction of wooden boats.

COLLATED NAILS ON A WIRE
They are used in the construction of wooden transport packaging, as well as in roofi ng using pneumatic tools (Max and Raich). The material used for manufacturing collated nails is bright drawn wire. They are divided into three types:

Smooth shank nails – construction nails,
Screw nails,
Ring nails/ EPAL-certifi ed ring nails.

COLLATED NAILS ON PLASTICS
They are used in the construction of wooden transport packaging, as well as in roofi ng using pneumatic tools (Max and Raich). The material used for manufacturing collated nails is bright drawn wire. They are divided into three types:

Smooth shank nails – construction nails,
Screw nails,
Ring nails

NAILS FOR PNEUMATIC TOOLS
They are used for machine manufacturing of transport pallets, crates, drums.

Objava Nails pojavila se prvi puta na Reta.

Facade

midori — Thu, 03 Mar 2022 11:23:07 +0000

The appearance of the facade or facade is the first thing we notice in a house or building, but the hidden features of the facade as protection of the building and its role in saving energy are even more important factors for proper selection.

Facade is a system of different materials that must fulfill their aesthetic, protective and economic function. The facade protects the structure from various atmospheric influences, mechanical damage, but also other negative influences such as stress due to temperature changes, extremely high or low temperatures, water or moisture penetration and destruction due to freezing, which significantly extends the life of the building.
A good facade can save as much as 40% in reducing energy consumption!

Today, there is practically no material that can not be used for this purpose, from classic plasters to modern thermal systems, and the choice will depend on the type of building under construction or renovation. The offer of finishing plasters and coatings is very wide, which perhaps contributes the most to the recognizability of each object – from smooth to rustic textures, from pastel to strong, open tones.
In our assortment we have facades for all purposes, manufactured by Baumit, Rofix, Jub, LB Knauf and Samoborka.
If you want to try out which colors go together, and how they fit into other parts of your house, LB Knauf and

Baumit has prepared online systems for testing and inspiration.

The basic components of any facade system are:

adhesive for gluing insulation layer
thermal insulation board / lamella (facade styrofoam or mineral wool)
adhesive for reinforcing the base layer and facade mesh
facade glass mesh for reinforcement
other facade accessories (profiles and fasteners)
primer for the top coat
decorative decorative plaster (acrylic, silicate or silicone)

Objava Facade pojavila se prvi puta na Reta.

Screed systems

midori — Thu, 03 Mar 2022 10:36:51 +0000

Screed or glaze is used to level unevenness on the substrate (usually concrete), to obtain a solid, flat and quality layer of floor suitable for walking or laying tiles and other floor coverings.

All floors must meet certain criteria in terms of resistance to mechanical damage, strength, hardness and thermal insulation, and in the area of residential and office spaces screed also serves as an improvement of sound insulation.

Cement screed is durable and waterproof, if it is installed correctly. It must not be processed at air temperatures below + 5 ° C, and large fluctuations in temperature and drafts increase the risk of cracking. Drying time is usually 28 days, and in the case of thicknesses greater than 5cm, the drying time increases. There are also quick-setting glazes, where coating is possible after 36 hours. Manufacturers LB Knauf, Samoborka, Rofix, Baumit and Mapei have different types of screeds in their program, depending on their purpose.

Self-leveling or leveling compounds are used for leveling concrete substrates and cement screeds or as a final layer before laying floor coverings (tiles, parquet, PVC or textile coverings). They can be for outdoor or indoor use in residential buildings, basements, terraces and garages, and many other areas. Manufacturers: Baumit, LB Knauf te Rofix.

Objava Screed systems pojavila se prvi puta na Reta.

Lumber

midori — Thu, 03 Mar 2022 10:10:33 +0000

Timber is a natural material obtained by mechanical processing of wood, and logs that are a clean part of the trunk are used for processing.
The category of the highest quality timber includes chopped and hewn timber, which are also the most expensive.
Timber can be divided into short – up to four meters long, and long – over four meters long.
Timber includes beams and beams sawn from coniferous or spruce wood in various cross-sections and lengths, in class II / III, which satisfies the needs of roof structures only in the case of previously correctly calculated static load and requirements of the structure itself.
This group also includes all types of battens that serve as a cover holder (tile, sheet metal, panel), as well as boards with standard thicknesses of 24 and 48 mm.
The slats usually come in cross sections of 3×5 cm, 4×5 cm, 5×5 cm and 5×8 cm, standard length 4 m ‘, but also other dimensions that depend on the needs of the construction site and the building.

These materials are also used in other segments of the building, such as various supports, gaps, formwork, etc., but their primary function is for roofing works.

ROOFING LUMBER:
Beams and beams of all cross-sections and lengths
Laths of section 3×5,4×5,5×5 and 5×8 cm of section
24 mm thick board
48 mm thick board
LUMBER IN CONSTRUCTION:
Beams 10×10 and 10×12 cm in cross section
24 mm thick board
48 mm thick board

Objava Lumber pojavila se prvi puta na Reta.

Interior decorative colors

kontra — Mon, 21 Feb 2022 10:00:03 +0000

Here we include all paints for interior walls that are not exposed to mechanical loads, pouring or soiling, and are used for painting walls in new buildings and for repainting old walls.
It is important to note that these are not washable paints, so it is not recommended to use them in buildings and rooms that are susceptible to water.

Various shades can be obtained by hand mixing with the use of colorants, but a much simpler and safer way is to mix the colors by machine.
With us, with the purchase of paints and colorants, you can get free machine mixing of colors in the Top-Mix system, and so be 100% sure that you will truly have the home you want.

In our offer you will find all the products needed to protect and paint interior walls, renowned manufacturers.

Chromos Light: Bravo, Kemopol, Kemopol Plus, Top Premium, Simpra (impregnation)
JUB: Jupol Classic, Jupol Ekonimik, Jupol Bio lime paint, Acrylic emulsion (impregnation)
Chromos paints and varnishes: Megapol, Poliflor

Objava Interior decorative colors pojavila se prvi puta na Reta.

Other paints and coatings

kontra — Mon, 21 Feb 2022 09:58:38 +0000

For protection of concrete, stone, brick and other surfaces and objects.
We offer Chomos Light products.

Objava Other paints and coatings pojavila se prvi puta na Reta.

Facade paints and paints for exterior use

kontra — Mon, 21 Feb 2022 09:57:46 +0000

Depending on whether it is a new building or renovation, we offer different quality solutions.
When choosing the type of paint for the protection and decoration of exterior surfaces, several factors need to be considered:

type of substrate,
physical condition of the substrate,
climatic conditions and troubles,
the expected durability of the chosen solution.

We offer Chromos Svjetlost.

In our paint studio we offer a machine color mixing service. That way, you can be absolutely sure that you will get exactly the shade you wanted.

Objava Facade paints and paints for exterior use pojavila se prvi puta na Reta.

Paints and varnishes for metal protection

kontra — Mon, 21 Feb 2022 09:56:28 +0000

Various metal products in our homes need to be protected from corrosion and give them the desired decorative look. With quality protection of internal and external metal surfaces, it is possible to significantly slow down their deterioration due to contact with the environment.
We use corrosion and old coatings to prepare the metal for further cheeks.
We give them the necessary protection with basic paints, and finally, they get the desired look with the help of decorative varnishes.

By using paints and varnishes from our wide range, in addition to beautifying painted metal surfaces, you give them longevity and resistance to atmospheric influences.
For special purposes, we offer coatings that protect metal objects exposed to high temperatures.

We offer Chromos Light products and Chromos paints and varnishes.

Objava Paints and varnishes for metal protection pojavila se prvi puta na Reta.

Paints and varnishes for wood protection

kontra — Mon, 21 Feb 2022 09:55:15 +0000

Wood is still the material most used in interior design, whether for decoration or function. It helps us feel more comfortable and keep in touch with nature.
But for the purpose of longevity and preservation of the original appearance, we must protect all wooden products from aging and various pests.
We nurture the wood with various stains and varnishes, and we protect it with impregnating agents and wood putties.

In the wide offer you can choose renowned manufacturers Chromos Svjetlost and Arp.

Objava Paints and varnishes for wood protection pojavila se prvi puta na Reta.

Bradstone Blue Lias plates

kontra — Mon, 21 Feb 2022 09:51:01 +0000

Scope: terraces, conservatories, house entrances, courtyards, arcades, passages

Structured surface
Resistant to UV radiation and freezing
Not resistant to salt
Not for running surfaces

Formats: 80 x 60 cm, 60 x 60 cm, 80 x 40 cm, 60 x 40 cm, 40 x 40 cm

Objava Bradstone Blue Lias plates pojavila se prvi puta na Reta.